Laminate Reducer

Reducer is used as a smooth transition between floors of different heights.
Laminate Reducer profiles are available @ our Greater Vancouver shop. Call today!

Laminate  Small Drop Reducer

Laminate reducer perfectly fits if difference between 2 floors heights is around 6-8 mm.

Length: 2400 mm
Wide: 45 mm
Height: 15 mm

Install the flooring leaving a one inch gap between two floors for the reducer installation.
As a rule the transition should be directly under the door when the door is closed.
Allow the floating floor to move freely, never fasten the transition pieces to the flooring. You can either glue it to the floor with construction adhesive or use the optional track to attach it.
Tracks or U shape channels are designed to snap transitions inside of channel and prevents the adhesive under transitions to touch the floorings from both sides.
Always make sure to keep a 1/4″ expansion zone around the transition piece, especially if you don’t use tracks. Because most tracks come in plastic we recommend applying the construction grade glue both under and into track channel to avoid getting the loose transitions.
Place a few heavy objects on the moulding overnight to ensure that it does not move while the glue dries.

Check specific colour moulding/transition page to see if the laminate Reducer profile is available for this particular colour at our Vancouver/Richmond warehouse.

We have more LAMINATE MOULDINGS profiles:

need a different colour?