Vinyl Overlap Nosing for 10-12 mm flooring

The main purpose of a nosing is to improve the safety of the staircase.
Overlap stair nose creates a transition to the edge of your step where the flooring meets the transition by overlapping the flooring on the back end instead of being flush.
Vinyl stair overlap nosing (10-12mm) stock is available @ our Greater Vancouver shop.

Thick Overlap Stair Nosing

Thick Overlap Nosing ideally fits the flooring with 10-12 mm thicknesses.
Nature Prints coordinating overlap nosings are good to be installed for vinyl, laminate and sometimes for wood flooring.

Length: 2400 mm

Wide: 55 mm

Height: 20 mm

WPC or SPC.
100% waterproof.
No buckling or bowing from water spills or moisture issues.

20 mil

Overlap Nosing should overlap the flooring by 1/4 to 3/8 inch, leaving the balance for required expansion or contraction.
To attach the molding, apply a generous bead of construction adhesive along the underside of the stair nose.
Carefully put stair nose into place against the front of the step.
Press down firmly over the entire stair nose and let the adhesive cure according to directions.

Check specific colour moulding/transition page to see if vinyl stair overlap nosing 10-12mm profile is available for this particular colour at our Vancouver/Richmond warehouse.

We have more vinyl transitions:

NATURE PRINTS FLOORS
need a different colour?

FIND YOUR SHADE: