Vinyl Overlap Nosing, Thin
The main purpose of the nosing is to improve the safety of the staircase.
Overlap stair nose creates a transition to the edge of your step where the flooring meets the transition by overlapping the flooring on the back end instead of being flush.
Vinyl thin overlap nosings‘ stock is available @ our Greater Vancouver shop.
Vinyl Overlap Nosing
Thin Overlap Nosing ideally fits the flooring with 8 mm or lower thicknesses.
Nature Prints coordinating overlap nosings are good to be installed for vinyl, laminate and sometimes for wood flooring.
Length: 2400 mm
Wide: 55 mm
Height: 18 mm
WPC or SPC.
100% waterproof.
No buckling or bowing from water spills or moisture issues.
20 mil
Overlap Nosing should overlap the flooring by 1/4 to 3/8 inch, leaving the balance for required expansion or contraction.
To attach the molding, apply a generous bead of construction adhesive to the subfloor and seat the molding in place.
Let the adhesive cure according to directions.
Check specific colour moulding/transition page to see if thin vinyl overlap nosing profile is available for this particular colour at our Vancouver/Richmond warehouse.
We have more vinyl transitions:
