Vinyl Square Edge Flush Nosing 5.5 mm

The primary purpose of 1 3/8” Drop Square Edge Flush Nosing is to enhance staircase safety. Flush nosing is designed for installation on the edge of the stair tread, giving your vinyl flooring a 1/8” eased square edge when leading down towards any stairs, sunken living room, or balcony overlook.
Square Edge, Flush Nosing profiles, are available in common and standard thicknesses, including 5.5 mm and 6.5 mm, aligning seamlessly with the majority of suppliers in the market.

Square Edge Flush Nosing

The 1 3/8” Drop Square Overlap Nosing is designed to fit flooring with a thickness of 5.5 mm but can be adjusted for up to 12 mm thicker or 2 mm thinner flooring. Nature Prints coordinating overlap nosings are suitable for vinyl, laminate, and sometimes wood flooring.

Length: 94”

Width: 2 5/8″

Height: 1 3/8”

  • Core: WPC (Wood Plastic Composite)
  • 100% waterproof
  • Resistant to buckling or bowing from water spills or moisture issues

To attach the nosing, apply a generous “S” shaped bead of construction adhesive along the underside of the stair nose.
Carefully put stair nose into place against the front of the step.
Press down firmly over the entire stair nose and let the adhesive cure according to directions.

Check specific colour moulding/transition page to see if 1 3/8” Drop Square Overlap Nosing is available for this particular colour at our Vancouver/Richmond warehouse.

We have more vinyl transition profiles:

need a different colour?