Vinyl Square Flush Nosing
Square Flush Nosing, available as custom order
This profile can be used as a flush finishing for the edge of stairs if the thickness of tread is around 6-8 mm. It is also adjustable to be used as an overlap nosing with vinyl flooring of 6mm or less in thickness. Nature Prints coordinating vinyl mouldings are good to be installed for vinyl, laminate and sometimes for wood flooring.
Length: 2400 mm
Wide: 130 mm
Thickness: 7.5 mm
- WPC
- 100% waterproof
- No buckling or bowing from water spills or moisture issues
20 mil
Make sure the subfloor is perfectly levelled. Start installing at bottom step and work to the top. The best glue to use for vinyl trim is pressure sensitive adhesives and PL Premium.
You may need to do extra shimming job to align this 7.5 mm thick vinyl flush square nosings with the thinner vinyl flooring .
Check specific colour moulding/transition page on this website to see if vinyl square flush nosing profile is available for this particular colour at our Vancouver/Richmond warehouse.