Vinyl Square Overlap Nosing with 1” Drop

The primary purpose of Square Overlap Vinyl Nosing is to enhance staircase safety.
Overlap stair nosing creates a transition to the edge of your step, where the flooring meets the transition by overlapping the flooring on the back end instead of being flush.
Our Square Overlap Vinyl stair nosing is available in 40 colours.

Square Overlap Nosing

Thick Overlap Nosing is designed to fit flooring with a thickness of 6.5 mm, but can be adjusted for a couple of millimeters thicker or thinner flooring. Nature Prints coordinating overlap nosings are suitable for vinyl, laminate, and sometimes wood flooring.

Length: 94”

Width: 2 3/4”

Height: 1”

  • Core: SPC (Stone Plastic Composite)
  • 100% waterproof
  • Resistant to buckling or bowing from water spills or moisture issues
  • Square Overlap Nosing should overlap the flooring by 1/4 to 3/8 inch, leaving the balance for required expansion or contraction.
  • To attach the molding, apply a generous bead of construction adhesive along the underside of the stair nose.
  • Carefully put the stair nose into place against the front of the step.
  • Press down firmly over the entire stair nose and let the adhesive cure according to the directions.
Check specific colour moulding/transition page to see if Square Overlap Nosing is available for this particular colour at our Vancouver/Richmond warehouse.

We have more vinyl transition profiles:

need a different colour?