Small Wood Reducer

Reducer allows for smooth transitions between floors of different heights.
Small wood Reducer profiles are available @ our Greater Vancouver shop.

Wood Reducer

For any 6-12 mm thick flooring. Nature Prints coordinating wood mouldings are good to be installed for wood, vinyl and laminate flooring.

Length: 7’, 9′ or 10′
Wide: 2 1/4”
Height: 9/16″

Red & White Oak

3 coats of matt or semi gloss polyurethane varnish

Install the flooring leaving one inch gap between two floors for the reducer installation.
As a rule the transition should be directly under the door when the door is closed.
Allow the floating floor to move freely, never fasten the transition pieces to the flooring. You can either glue it to the floor with construction adhesive or use the optional track to attach it.
Always make sure to keep a 1/4″ expansion zone around the transition piece.
Place a few heavy objects on the moulding overnight to ensure that it does not move while the glue dries.

Check specific colour moulding/transition page to see if small wood Reducer profile is available for this particular colour at our Vancouver/Richmond warehouse.

We have more WOOD MOULDINGS profiles:

need a different colour?